TRACK.
CAPTURE.
DELIVER.

Morey MC-4

Morey’s Robust Fleet Telematics Solution

From the introduction of the MT-30 in 2008, Morey has continuously enhanced the Morey Connect series of solutions to deliver the most powerful, flexible and integrated wireless fleet management system on the market.  The all-new MC-4 Series, including MC-4 and MC-4+, are Morey’s latest telematics devices designed to log and store diagnostic, power and locational data for single and mixed fleets—collecting data for up to seven days, powered or not, and supporting almost any asset in even the most rugged environments.

Fleet managers can seamlessly access data from across the globe using Bluetooth, GPS and 4G LTE technologies and UDR, while drivers can electronically log hours-of-service and track and share records of duty data to maintain compliance with the FMCSA’s ELD mandate. The IoT hardware plug-and-play deployment also allows users to easily install the device, customize datasets, and begin receiving data immediately.  With flexible, custom-off-the-shelf configuration, the MC-4 series is an ideal solution for OEM-level, enterprise and after-market applications. No matter how unique your fleet is, the MC-4 series devices are all you will need.

Contact Us

Technical Specifications

Reach Capabilities

  • AT&T 4G LTE CAT 1 w/3G fallback
  • Bluetooth Smart Ready v4.2
  • Multi-constellation global position
  • UDR for continuous positioning
  • User interface options: Bluetooth, USB, UDP, SMS & other protocols
  • USB OTG w/500mA Output (high-side driver)
  • Over-the-Air (OTA) Programming, Provisioning, Status Inquiry & Log Retrieval
  • Multi-thread scripting options
  • Automatic reporting (periodic or event based)
  • Selectable modes of operation
  • Internal fault management and logging

Interface Capabilities

  • Interfaces to most light/med/heavy vehicles
  • Class I-VIII vehicles
  • Dual CAN support
  • 12V & 24V power systems
  • Customizable Interconnect Cables & Harnesses

Detection Capabilities

  • Digital I/O and analog I/O options w/sensor support (typical: 4DI/2DO/1AI)
  • Detect and report:  aggressive driving, distance traveled, idle, engine state, geofence state, heading change, motion, speed bands
  • 6 Degrees of Freedom (3D digital accelerometer and 3D digital gyroscope)

Ruggedness

  • SAE J1455 Level 1
  • FM Class 1, Div 2 non-incendiary
  • Sealed to IP67

Physical Specs

  • Dimensions (Metric): approx.. 15cm x 7.5cm x 2.3cm
  • Dimensions (US): approx.. 6” x 3” x 1”
  • Weight: 0.6 lbs.0.275 kg

Environmental Specs

  • Operating Temperature:  -40˚ to 85˚C
  • Storage Temperature:  -40˚ to 85˚C
  • Battery load dump protected
  • ESD immunity
  • EMC/EMI: CISPR 25; Industry Canada
  • SAE J1455 Level 1 Pressure Wash
  • IP67

Electrical Specs

  • Operating Voltage:  12V & 24V system

GPS Device Specs

  • Position Accuracy:  3m
  • Hot Start Acquisition:  ~2 secs
  • Tracking Sensitivity:  -160 dBm
  • Acquisition Sensitivity:  -146 dBm
  • Update Rate:  1Hz

Memory

  • 30-90 day store-forward capabilities

Input/Output

  • Digital I/O (maximums)
  • Analog Input
  • (6) digital inputs (STB / STG)
  • 5V Output
  • Digital Output
  • Diagnostic Port: USB
  • Status LEDs:  Red, Amber, Green & Blue
  • Twilight Sensor: Dimming LEDs
  • Bluetooth

Vehicle Interface

  • (2) CAN 250k, 500k
  • J1708
  • ISO9141-2
  • KWP2000
  • J1850 VPW & PWM
  • Vehicle Protocols (J1939, J1587, OBD II)

Morey MC-4

Morey’s Robust Fleet Telematics Solution

From the introduction of the MT-30 in 2008, Morey has continuously enhanced the Morey Connect series of solutions to deliver the most powerful, flexible and integrated wireless fleet management system on the market.  The all-new MC-4 Series, including MC-4 and MC-4+, are Morey’s latest telematics devices designed to log and store diagnostic, power and locational data for single and mixed fleets—collecting data for up to seven days, powered or not, and supporting almost any asset in even the most rugged environments.

Fleet managers can seamlessly access data from across the globe using Bluetooth, GPS and 4G LTE technologies and UDR, while drivers can electronically log hours-of-service and track and share records of duty data to maintain compliance with the FMCSA’s ELD mandate. The IoT hardware plug-and-play deployment also allows users to easily install the device, customize datasets, and begin receiving data immediately.  With flexible, custom-off-the-shelf configuration, the MC-4 series is an ideal solution for OEM-level, enterprise and after-market applications. No matter how unique your fleet is, the MC-4 series devices are all you will need.

Contact Us

Technical Specifications

Reach Capabilities
• AT&T 4G LTE CAT 1 w/3G fallback
• Bluetooth Smart Ready v4.2
• Multi-constellation global position
• UDR for continuous positioning
• User interface options: Bluetooth, USB, UDP, SMS & other protocols
• USB OTG w/500mA Output (high-side driver)
• Over-the-Air (OTA) Programming, Provisioning, Status Inquiry & Log Retrieval
• Multi-thread scripting options
• Automatic reporting (periodic or event based)
• Selectable modes of operation
• Internal fault management and logging
Interface Capabilities
• Interfaces to most light/med/heavy vehicles
• Class I-VIII vehicles
• Dual CAN support
• 12V & 24V power systems
• Customizable Interconnect Cables & Harnesses
Detection Capabilities
• Digital I/O and analog I/O options w/sensor support (typical: 4DI/2DO/1AI)
• Detect and report: aggressive driving, distance traveled, idle, engine state, geofence state, heading change, motion, speed bands
• 6 Degrees of Freedom (3D digital accelerometer and 3D digital gyroscope)
Ruggedness
• SAE J1455 Level 1
• FM Class 1, Div 2 non-incendiary
• Sealed to IP67
Physical Specs
• Dimensions (Metric): approx.. 15cm x 7.5cm x 2.3cm
• Dimensions (US): approx.. 6” x 3” x 1”
• Weight: 0.6 lbs.0.275 kg
Environmental Specs
• Operating Temperature: -40˚ to 85˚C
• Storage Temperature: -40˚ to 85˚C
• Battery load dump protected
• ESD immunity
• EMC/EMI: CISPR 25; Industry Canada
• SAE J1455 Level 1 Pressure Wash
• IP67
Electrical Specs
• Operating Voltage: 12V & 24V system
GPS Device Specs
• Position Accuracy: 3m
• Hot Start Acquisition: ~2 secs
• Tracking Sensitivity: -160 dBm
• Acquisition Sensitivity: -146 dBm
• Update Rate: 1Hz
Memory
• 30-90 day store-forward capabilities
Input/Output
• Digital I/O (maximums)
• Analog Input
• (6) digital inputs (STB / STG)
• 5V Output
• Digital Output
• Diagnostic Port: USB
• Status LEDs: Red, Amber, Green & Blue
• Twilight Sensor: Dimming LEDs
• Bluetooth
Vehicle Interface
• (2) CAN 250k, 500k
• J1708
• ISO9141-2
• KWP2000
• J1850 VPW & PWM
• Vehicle Protocols (J1939, J1587, OBD II)

Morey MC-4

Morey MC4

Morey’s Robust Fleet Telematics Solution

From the introduction of the MT-30 in 2008, Morey has continuously enhanced the Morey Connect series of solutions to deliver the most powerful, flexible and integrated wireless fleet management system on the market.  The all-new MC-4 Series, including MC-4 and MC-4+, are Morey’s latest telematics devices designed to log and store diagnostic, power and locational data for single and mixed fleets—collecting data for up to seven days, powered or not, and supporting almost any asset in even the most rugged environments.

Fleet managers can seamlessly access data from across the globe using Bluetooth, GPS and 4G LTE technologies and UDR, while drivers can electronically log hours-of-service and track and share records of duty data to maintain compliance with the FMCSA’s ELD mandate. The IoT hardware plug-and-play deployment also allows users to easily install the device, customize datasets, and begin receiving data immediately.  With flexible, custom-off-the-shelf configuration, the MC-4 series is an ideal solution for OEM-level, enterprise and after-market applications. No matter how unique your fleet is, the MC-4 series devices are all you will need.

Contact Us

Technical Specifications

Reach Capabilities
• AT&T 4G LTE CAT 1 w/3G fallback
• Bluetooth Smart Ready v4.2
• Multi-constellation global position
• UDR for continuous positioning
• User interface options: Bluetooth, USB, UDP, SMS & other protocols
• USB OTG w/500mA Output (high-side driver)
• Over-the-Air (OTA) Programming, Provisioning, Status Inquiry & Log Retrieval
• Multi-thread scripting options
• Automatic reporting (periodic or event based)
• Selectable modes of operation
• Internal fault management and logging
Interface Capabilities
• Interfaces to most light/med/heavy vehicles
• Class I-VIII vehicles
• Dual CAN support
• 12V & 24V power systems
• Customizable Interconnect Cables & Harnesses
Detection Capabilities
• Digital I/O and analog I/O options w/sensor support (typical: 4DI/2DO/1AI)
• Detect and report: aggressive driving, distance traveled, idle, engine state, geofence state, heading change, motion, speed bands
• 6 Degrees of Freedom (3D digital accelerometer and 3D digital gyroscope)
Ruggedness
• SAE J1455 Level 1
• FM Class 1, Div 2 non-incendiary
• Sealed to IP67
Physical Specs
• Dimensions (Metric): approx.. 15cm x 7.5cm x 2.3cm
• Dimensions (US): approx.. 6” x 3” x 1”
• Weight: 0.6 lbs.0.275 kg
Environmental Specs
• Operating Temperature: -40˚ to 85˚C
• Storage Temperature: -40˚ to 85˚C
• Battery load dump protected
• ESD immunity
• EMC/EMI: CISPR 25; Industry Canada
• SAE J1455 Level 1 Pressure Wash
• IP67
Electrical Specs
• Operating Voltage: 12V & 24V system
GPS Device Specs
• Position Accuracy: 3m
• Hot Start Acquisition: ~2 secs
• Tracking Sensitivity: -160 dBm
• Acquisition Sensitivity: -146 dBm
• Update Rate: 1Hz
Memory
• 30-90 day store-forward capabilities
Input/Output
• Digital I/O (maximums)
• Analog Input
• (6) digital inputs (STB / STG)
• 5V Output
• Digital Output
• Diagnostic Port: USB
• Status LEDs: Red, Amber, Green & Blue
• Twilight Sensor: Dimming LEDs
• Bluetooth
Vehicle Interface
• (2) CAN 250k, 500k
• J1708
• ISO9141-2
• KWP2000
• J1850 VPW & PWM
• Vehicle Protocols (J1939, J1587, OBD II)